Nortel Networks 3510-24T giga switch

過去の資料から

Nortel製のギガハブを入手しましたので,初期化してみました。
作業内容は,次のURLを参照させて頂き作業完了しました。
いつもは,Cisco製のハブを活用しておりますが,Nortel製ギガハブもWebアクセスができたりと楽しめそうです。
このクラスのハブになると多機能で面白いです。

「Hi Try the following – it should go back to factory default settings

There can be times when you need to factory reset a switch. This process can be accomplished through the CLI but if you’ve lost the switch password you’ll need to follow a special process. This process should work for any of the Ethernet Switches (450, 460, 470) and the Ethernet Routing Switches 2500 Series, 4500 Series, 5500 (5510, 5520, 5530) Series. There is a different process to recover lost passwords on the Ethernet Routing Switch 1600 and 8600. Please note that by factory resetting the switch you will loose all configuration settings. It will be as if it just arrived from the “factory”.

Follow these steps:

1. Connect to the console port of the switch (9600,8,N,1)

2. Reboot the switch.

3. When the first line of the diagnostics tests is displayed, press CTRL-C. The system then displays a menu.

4. Select option “i” to factory default the switch.

5. Select option “a” to run the agent code.
Upon boot up, the switch will be in a factory default configuration 」

参照元URL
http://www.fixya.com/support/t3819067-reset_password_n_3510_24t_nortel_switch